Maximize durability in heat transfer
With Technoform the installation of PPS-GR tubes with o-ring sealing is simple, reliable and easy. We’re not only combining the durability of high-performance polymer PPS with the thermal conductivity of graphite. But also focusing on convenience when it comes to maintenance and installation.
Efficient and easy installation
Preparation: O-Ring groove and borehole design
Work closely with Technoform's heat transfer solutions support team to design the O-ring grooves and borehole. Take into account the tolerances of the PPS-GR tubes and O-rings and ensure chamfering of sharp edges at the entry of the borehole and groove edges to prevent damage during installation.
Installation: Step 1 - Lubrication
Prior to installation, immerse the O-rings in a bath of soap water and spray the PPS-GR tubes with soap water to ease the installation process. Silicon-based greases may also be used as an alternative lubricant.
Installation: Step 2 - Inserting the tubes
Gently insert the lubricated tubes into the designed boreholes with the O-rings in place. Avoid using excessive force or hammering, as this can cause damage to the tubes.
Post-Installation: Verification
Ensure that each tube is properly sealed and positioned correctly. Follow the detailed sketches and step-by-step procedures provided in the manual and accessible via QR-code linking to an installation video on our website.
Watch the installation process step by step